Diamond Brite

Exposed Aggregate Pool finish

Diamond Brite is an exposed aggregate finish that is used in the interior of swimming pools and spas. It is a mixture of quartz aggregates and fortified white portland cement. Diamond Brite is available in a variety of colors and textures. Diamond Brite finishes offer pool owners an extremely durable and attractive alternative to the more traditional white pool coatings.

Diamond Brite offers many advantages:

• Superior bonding to pool shells
• It's durable finish offers strength and rapid curing
• It is extremely etch resistant
• Very easy to apply
• Excellent warranty

Fill and Balancing

Proper start up and pool balancing must be used to insure the integrity of your newly re-finished pool. Fill pool without interruption with clean, potable water. We recommend using a filter during the filling of the pool.

First Day: After the pool is full, start the pump and set the timer to let the pool circulate continuously for three (3) full days. Adjust the pH level in the pool to 7.2 - 7.4 and the total alkalinity to 100 PPM. DO NOT add chlorine or calcium chloride for three (3) days. Clean the filter as needed. Brush the entire surface twice(2) a day for the first three days.

Second Day: Repeat steps as day one.

Third Day: Adjust chemistry to the following levels:

Free Chlorine: 1.0 - 3.0 PPM

pH: 7.4 - 7.6

Total alkalinity: 80 - 120 PPM

Calcium Hardness: 200 - 400 PPM

Stabilizer: 30 - 100 PPM

Adjust pump timer to normal operating hours. Do not install automatic pool cleaners for 28 days. Do not vacuum the pool with a wheeled vacuum for 14 days. Brush the pool walls and floor daily for the first two (2) weeks.

Diamond Brite Warranty

Diamond Brite Finishes off a 10 year residential / 5 year commercial limited warranty.

For further information please email or contact us at 1 (800) 725-4008.